Ask yourself if you can safely stop within the distance of your lights — if not, reduce your speed. If you can see just feet ahead , you cannot safely drive faster than 30 mph. Take our full course with tests and theory. In some cases, […]. Engine braking is the process of reducing the speed of your car by removing your foot from the accelerator pedal and shifting down through the gears.
It works without ever having to engage the foot brake. When you take your foot off the accelerator, the throttle body valve closes, limiting airflow […]. Ace your DMV test, guaranteed Learn more. Start learning now Select Course. What Are Main Beam Headlights? When To Use Your Main Beams You should use your main beams when visibility is low and lighting on the road is very limited.
You should never turn on your main beam if: You are driving behind a vehicle Other vehicles are on the other side of the road Driving on left hand bends If your main beams will cause other road users, cyclists or pedestrians to be dazzled then you will need to switch back to dipped beam. Failure to do so may cause you to be fined. Notify of. Inline Feedbacks. Skip to toolbar About WordPress. High-beams increase your visibility to to feet, or the distance of an average city block.
However, do not solely rely on high-beams, and remember to always adjust your driving speed according to the road conditions. Different makes and models of cars have different methods for switching from low-beam to high-beam and back. In most cases, the mechanism is built into the lever next to the steering wheel, where the headlights are turned on and off. To change from low-beam to high-beam, simply turn on the headlights and then press the lever with your hand, or activate the floor button with your foot.
To change back, simply repeat this action. In some models with lever-activated high-beams, you can press the lever in one direction to flash the high-beams once, and pressing in the other direction turns them on permanently.
0コメント